We have all slept in a tent when it’s pitched on unlevel ground, and you end up slowly sliding to one end overnight. Well, the same thing happens in RVs too but with worse consequences. Your clean dishes can slide across into the sink, the contents of your fridge might fall over and spill, and let’s not even get started about trying to boil some pasta on an uneven grill.
Your only option when finding your RV on uneven ground are to move it to a new spot, but who wants to do that? Your other option is to buy some RV leveling blocks that you can put under your wheels to ensure your RV is sitting level (learn more in this detailed post).
Camper leveling blocks are easy to use. Just set the level, drive onto them, and boom, in less than 5 minutes, your RV will be leveled out. Not all leveling blocks are the same though. They have different weight capacities, and different heights they can go to, and some are more durable than others. All these variables make finding the ideal leveling blocks for you quite tricky, which is why we did it for you.;
Below you’ll find reviews of some of the best RV leveling blocks on the market so you can find the right ones for you.
|SEE ON AMAZON →|
|SEE ON AMAZON →|
Best On A Budget
|SEE ON AMAZON →|
|SEE ON AMAZON →|
Best Of The Best
|SEE ON AMAZON →|
|SEE ON AMAZON →|
|SEE ON AMAZON →|
|SEE ON AMAZON →|
The Andersen 2-Pack Camper Leveler comes in two parts, a curved leveling block for you to drive on to and a chock that you plug in to hold it steady.
You get two of each with this deal, which is enough to raise one end of your RV but you may want to get 2 sets so that you can use them on both ends when you’re on really uneven ground.
The blocks can handle a load of up to 30,000 lbs and tire sizes of up to 32 inches. They have a maximum lift of 4 inches, which is usually enough but won’t always get the job done, unfortunately.
You can have your RV leveled quickly and easily with these blocks, just drive on and chock them in, and that’s it. It shouldn’t take more than 5 minutes, and then you can get to enjoying fishing, grilling, hiking, or anything else you fancy doing in the backcountry.
The blocks come with a lifetime guaranteed, which is great because they are more expensive than most camper leveling blocks. The only downside to these blocks is that they have a smooth surface which can cause some slipping.
Some people add electrical tape to enhance the friction, but it doesn’t last very long and needs re-applying quite often.
The Camco Yellow Drive On Tri-Leveler couldn’t be easier to use. It has 3 different levels set out for you at 1.3 inches, 2.6 inches, and 3.9 inches and all you have to do is drive on to the right one to level your RV. Simple right?!
The Camco RV leveling blocks have are bright yellow so you can see them with ease, and are made from a durable high-quality resin. The parts where the wheels will rest also have some solid grip to keep your RV in place without any slippage.
The leveling blocks are rated to hold 3500 lbs per wheel which will manage most RVs and fit all tire sizes but aren’t great for tandem wheels due to their slim width.
You can raise your wheels to a maximum of 3 and 7/8 inches, which is enough in most cases but still a little limiting. The one issue that these RV leveling blocks have is that they are prone to slipping on smooth surfaces, which can become rather annoying as you’ll have to constantly re-level or move spots.
Overall, these are solid leveling blocks, and they’re affordable too. They’re worth it if they fit the bill of your RV.
The Camco Heavy Duty Leveling Blocks come in packs of 10, which is enough for a single axel RV, but if you have dual, up it to two packs of 10. They work like the other leveling blocks with this lego design.
All you have to do is build a staircase to your desired height and drive up onto them. You can’t build higher than 4 inches though, or the bottom blocks will crack. While this is not the best, 4 inches is usually enough, and these blocks are so affordable too that it makes sense.
The blocks, while being durable, can only hold a maximum RV weight limit of 10,000 lbs, so check your RV weight before you go adding them to your cart. They are made from durable, light plastic and come with a solid bottom so they don’t sink into soft ground.
The tops are also covered in traction in order to stop your RV from slipping but it is still worthwhile getting some chocks to hold it in place and stop it rolling off the back.
The blocks come in a handy zippered storage bag, making them easy to carry around and keep together. The only major downside bar the height limitation is that the bocks can break on hard surfaces like gravel, so be careful when using them on rocky surfaces.
The Camco FasTen Leveling Blocks are a little bit like giant lego, well not a little bit, they are. They come in packs of 10 and you can use them to build any height ramp you like for your RV up to 4.5 inches. If you need more than that, you should probably change your parking spot.
These blocks are ideal for RVs with dual tires. They are super wide at 17 inches, so you’ll easily be able to get both tires onto the block and level your RV. Using them is easy, just build the blocks to your desired height and drive on to them.
The top surface is very grippy to ensure your tires don’t slip off, and the bottom also has great traction and won’t slip on any surfaces. You can also buy filler caps for the tops, at the large nodules could cause some tire damage if resting on them for too long.
Another great thing about these RV leveling blocks is how convenient they are to store and carry around You can stack them all on top of each other to create one big block, and there is even a carry handle to make moving them around easy.
The blocks are quite expensive but there are highly durable and can handle over 40,000 lbs of weight resting on them.
The Quality Plastics Utility Blocks are about as durable and tough as RV leveling blocks can be. They will handle any weight you can throw at them and you can stack them as high as you like without any limitations.
The blocks are made from thick rubber, which is why they have such loadbearing strength. The rubber also helps create traction on the ground and on the wheels of your RV resulting in leveling blocks that work in any weather and on any surfaces around. With these blocks, slipping will be a thing of the past.
Using these blocks is easy, just build them like stairs to the level you want and drive up on to them. It’s that simple. They are also easy to carry around and store, simply stack them for storage and each one comes with a rope carry handle so you can move them around with ease.
The RV leveling blocks are also quite versatile and can be used for anything from propping up a jack to stabilizers and more. The only downside to these RV leveling blocks is that they are expensive. They are the most expensive ones around, but they will last a lifetime.
The OxGord RV Leveling Ramps make leveling your RV about as simple as it can be. They are essentially ramps with 3 different levels to choose from, and all you have to do to level out is drive up on to them.
Once you’re up make sure your wheel is fully on the level you want, as they can quite easily drop down to the next level if not fully parked.
The ramps are lightweight for potability but they are also very strong and can accommodate up to 11,000 lbs per axel. More than enough for any regular RV.
The levels on the ramps have 3 increments and give a maximum lift of 3.8 inches, and go up in increments of 1.25 inches at a time, so you can pick the level you want. They also have a rigid non-slip surface that grips your tires so they don’t slip once leveled.
The leveling ramps work on all surfaces, but they do have a tendency to crack on gravel due to the uneven nature of it, so be careful if you’re leveling up on a gravel surface.
If you have a dual axel, these leveling ramps are probably too long to fit between your tires, and it’s not worth trying to trim them, as it compromises the entire block.
Otherwise, these are durable, simple to use, and very affordable RV leveling blocks.
The BUNKERWALL Tandem Axle Leveler is one of the smartest designs of RV leveling blocks I’ve come across. They come in 2 parts, one with 2 levels and a third with the highest level. They easily slot together to give you a full 3 level block or you can split them to fit the lower between your dual tires.
The blocks are light, portable, and have a great load capacity of 10,000 lbs per axel. They give a maximum height of 4.5 inches, with 1.2-inch and 3.4-inch levels in between. Each block has a high traction surface on the top so you can easily push your RV on, and once on, it’s not going to slip.
The blocks are made from HDPE, high-density polyethylene, one of the toughest plastics around and they will last you a lifetime without any cracking to be seen.
The one major downside of these RV leveling blocks is that it’s quite hard to use them if you’re alone, as you have to pause to add the second half of the block if you want to use the maximum height of 4.5 inches.
Otherwise, they are a great choice thanks to their durability, portability, and clever two-part design to accommodate dual axel RVs.
The Tri-Lynx RV Levelers are another lego based design. You get a pack of 10 blocks that are 8.5 x 10.5 inches and you can interlock and stack them together to make the exact levelers you need. The great thing about this is, you have zero height restrictions and can build as high as you like until you’re out of blocks.
10 blocks are enough for a single axel RV but if you have a dual, then you’ll need to buy two packs. The blocks are light, portable, easy to store (just stack them up), and are made from highly durable plastic.
The Tri Lynx leveling blocks can handle a weight limit of up to 40,000 lbs thanks to their honeycomb design, more than enough for any RV, even a class A.
The honeycomb design does have some drawbacks though. It causes the blocks to sink in wet ground, and a lot of dirt can get into all the notches, which you will then take into your RV for storage.
To use the blocks for leveling, you should stack them like a staircase, place the staircase in front of your tires, and drive up to the top. It couldn’t be simpler.
Overall, these RV leveling blocks are excellent and they are affordable. And just to throw in another bonus, they also come with a 10-year warranty.
Firstly, you’re going to be putting an RV that could weigh up to 40,000 lbs onto these leveling blocks, so they better be able to handle it. Secondly, if your blocks break while you’re on them, any kind of accident could happen. Things could spill, people could hurt themselves, you could damage your RV. All of these possibilities are a no-no and can be avoided.
Every leveling block in the review has a maximum weight capacity, so be sure to check the weight of your RV and make sure it matches, and don’t forget to add some weight for the passengers and gear inside.
You should also consider the climates you’ll be staying in. In places like Arizona, the temperatures fluctuate from boiling hot in the day to freezing cold at night, and this can put a lot of strain on your blocks and cause them to crack.
The best material to go with is rubber, as it doesn’t break under any load, and it can handle all weather but it is expensive. Plastic ones are good too, but make sure you check the load capacity matches your RV, as they differ from 10,000 lbs to 40,000 lbs.
All RV leveling blocks have a maximum height based on their design or their durability. Most max out around the 4.5-inch mark while others do 3.85 inches. You can buy lego type blocks, that allow you to build as high as you like, but if you’re going over 5 inches, you should probably just park somewhere else.
Different designs of RV leveling blocks mean that some are easier than others. A ramp for example is extremely simple, just measure the height you need and drive up the leveler. Block-based designs require you to build your ramp first, which takes a little longer.
You should also think about portability, storage, and how easy they are to clean.
The best all-around leveling blocks are the Camco FasTen Leveling Blocks. These leveling blocks are durable, handle a heavy load, can be stacked up to 4.5 inches of lift, and are wide enough for a dual axel RV. They’re also super easy to store and have a convenient carry handle for portability. Another great thing about them is that they work on all surfaces, and are grippy as hell to stop your RV from slipping.
The best overall RV leveling blocks are the Quality Plastics Utility Blocks. They are actually made of rubber and are as tough and grippy as RV leveling blocks can get. They can handle any load, work on any surface, and in any weather. The only downside is that they are expensive, but you will have them for life, so it’s worth the investment.
The best budget leveling blocks are the Camco Heavy Duty Leveling Blocks. They are super affordable, give you a height of 4.5 inches, and come in a handy carry bag for portability. Using them is easy too, just build a staircase and drive on, and you’re done. The surface also has great traction to stop any slipping too.