There is nothing like having good water pressure, especially in a shower, and we don’t suffer it at home. If the shower has poor pressure, we do something about it. But, when we’re on the road or camping, the fact you can even have a shower, even if the water pressure sucks, is a godsend.
At A Glance: Our Top 3 RV Water Pumps
But wouldn’t it be better if the shower in your RV was as good as your one at home? Well, with the best RV water pump, that dream can become a reality.
Your RV will have a freshwater tank that holds around 50-200 gallons of fresh water, so why not utilize it so you can have refreshing showers whenever, and wherever you like?
Adding an RV water pump to your RV is simple, easy, and affordable. And there are a lot of pumps out there to choose from but don’t worry, we are here to help.
Below, you’ll find some of the best RV water pumps around, and we have dug into the details around their PSI, GPM, and other pros and cons so you can find the perfect match for your RV’s water system.
![]() | Best On A Budget
| SEE ON AMAZON → |
![]() | Best Of The Best
| SEE ON AMAZON → |
![]() | Best Allrounder
| SEE ON AMAZON → |
![]() |
| SEE ON AMAZON → |
![]() |
| SEE ON AMAZON → |
| SEE ON AMAZON → | |
![]() |
| SEE ON AMAZON → |
![]() |
| SEE ON AMAZON → |
The Seaflo RV Water Pump is another great choice for anyone who has a small RV or one without a luxury shower. It’s durable, affordable, and will give you enough pressure for everything to work fine.
The pump is self-priming and comes on automatically when you turn the taps on and off. So no hassles there. It also has an excellent build and will last for years thanks to the design and the durable materials used to make it.
Some people have used this water pump for 4 years and had it work again after they forgot to winterize it, so that’s some tough going.
The pump pushes the water out at 1.2 gpm which is enough for a small RV or a normal RV with a basic shower. If you have a large RV or a luxury shower and want so solid pressure, you’ll want a pump that can do around 3.5 GPM.
This RV water pump is also quiet while it runs, but it’s not silent, there is still some noise. It’s also extremely affordable at around the $20 mark, and for the quality, it’s hard to beat.
The Flojet Quad II RV Water Pump is designed to be a quiet pump, and it does a good job of it too. You might want to add an insolation pad and to ensure the pipes are vibrating against the RV to ultimate peace and quiet though.
It’s a self-priming RV water pump and it’s made from quality materials that don’t corrode, ensuring you have minimal maintenance to do. The pump also has a great suction lift of up to 7 ft, and others have used it to pump 17 ft horizontally and 4 ft up in their RVs without any worries.
The installation is very easy as the pump uses zero leak quick slide connectors and you can find a lot of adapters to match your current setup. It’ll automatically come on when there is 1.5 bar of pressure in the system, giving you instant water pressure when you open a tap or shower.
The RV water pump pushes out 3.2 gpm of water, which is ideal for RVs and matches most hot water tanks and plumbing systems you’ll find.
This pump is a little more expensive than others, but that’s because it has some soundproofing added to it. You’ll find it a lot quiet if have never used a ‘quiet pump before’ but if you have, it’ll probably be quite similar.
The Flojet Triplex RV Water Pump is an ideal choice for your RV, as long as you don’t mind a little noise while it’s operating.
It’s a self-priming pump, meaning it primes itself in order to get going, so you don’t have to pump water in there when it starts up. The 12V RV water pump is made from durable materials that are corrosion resistant to ensure the pump’s longevity.
It comes with everything you need to install it with and even includes noise-absorbing mounts to help reduce how loud it is when it’s pumping. It does make a little bit of difference but the water pump is still noisy.
The hook-up is easy, and once you connect it to your 12-volt system, just turn it on and the pressure switch setting of 3.4 bar will have it turn on automatically when you run your taps or your shower. This makes using it very simple, but you will need to confirm your RV can provide 3.4 bar for it to get going.Â
This RV water pump pushes water at 2.9 gpm, an ideal amount for most RVs and it has up to 9 feet of suction lift, meaning it can take water from your onboard tank to your shower with ease.
You won’t have to wait for the water to arrive ever again with this RV water pump in operation, and you’ll enjoy high-pressure showers and be able to fill the sink quickly while you’re doing the dishes.
The Shurflo Fresh Water RV Pump is another great choice for your RV, but again, it’s pretty noisy. The instructions even say don’t mount it in your bedroom, but for some, that’s where the water tank is.
If you don’t mind a little noise now and then, this fresh water pump will deliver excellent pressure to all your taps and showers in your RV.
This is a self-priming pump for ease of use, and it’s made from durable materials to guarantee low maintenance and hassle-free long term pumping experience. Once hooked up to your 12-volt system, the pump automatically kicks in at around 5 Psi to deliver water all around your RV.
It’ll keep pumping as need and has an auto-cut-off of 45 Psi to ensure it doesn’t overwork itself. The 12 volt RV water pump delivers 3.5 gallons per minute, which matches most RV water systems and hot water tanks. So you can rest assured that this RV water pump will work with your RV’s system.
The pump is easy to install, has a one-way valve to stop any backflow, and it’s affordable. It also comes with a 1-year warranty and the only downside is the noise it makes.
The Bayite Fresh Water RV Pump is about as affordable as an RV pump can get. You can buy it for less than $20, but it is cheap for a reason. Most people find this pump doesn’t last very long, but with some tweaks, they get it working fine.
If you know your water pumps, this might be a very cost-effective RV pump, and if you don’t, then it’s worth owning as spare as it’s so affordable.
The fresh water pump is self-priming and is made from durable materials that handle corrosion well. Installing it is simple, but it’s not water-resistant, so you’ll need to make sure it’s installed in a dry area away from any water or weather.
Once installed it’ll click on automatically at 35 Psi and click off at 80 Psi. Some people have had issues with it trying to click off and then it turning on at higher Psis than 35. When in operation the water pump isn’t loud, but it’s not quite quiet either.
You’ll get about 1.05 gallons per minute out of this 12 volt water pump which is a bit low but might work for some smaller RVs. There also aren’t too many RV hot water tanks that will click on at this flow rate, so be sure cot check yours before you buy this water pump.
This RV water pump is also extremely small and light, which makes installation a bit easier if you’re putting it in a tight space.
The Shurflo Revolution Standard RV Pump is quiet, durable, affordable, and pumps out at a great pressure for most RVs.
It’s a self-priming pump, so zero hassles there as it can run dry and get itself going without any worries. The pump also comes with a pressure switch and will cut in automatically when you need it to and turn off once it hits 55 psi. You’ll have great water pressure whenever you need it.
The RV water pump is made from durable materials that handle corrosion and any build-up well. It’s also simple to service, making any maintenance a lot easier.
The 12-volt water pump will push out 3 gallons per minute, which is perfect for an RV, and it lines up with most RV tankless water heaters too. With this water pump, you can enjoy a good shower and fill your sink quickly when you need to do the dishes.
Installation is easy, but the required flex barb fittings not included which isn’t an issue if you’re swapping it in but if you’re doing a new install, you’ll need to order them.
Overall it’s a great water pump that’s quiet and has limited issues once installed, and it comes with a 1-year warranty.
The Remco AQUAJET Rv Series Water Pump is a serious pump and it best suited to larger RVs and motor homes. This is because its pressure output is high and if put in a small RV it can bust valves and pipes.
It self-primes so runs dry without any issues, and it’s made from durable materials that are backed with a 2 -year warranty, just in case anything goes wrong.
This water pump will automatically cut in when you run a tap or shower and will cut off at 75-80 Psi. The cut-off is also adjustable so you can tailor it to your plumbing needs.
A word of warning here, some users have had this water pump push out to 110 Psi and blow their valves and plumbing system, causing a lot of damage. Be careful when using it, and make sure it’s set up for your plumbing system.
When in operation, the 12 volt water pump is quieter than most and will push out 3.5 gallons per minute, which is ideal for use in an RV. The RV water pump is quite expensive though, and almost 8 times the price of some noisier pumps, so it is a bit of an investment.
If you own a smaller RV and don’t need a huge amount of pressure, the RV/Marine Fresh Water RV Pump is a great one to have a look at.
This is another self-priming water pump that is well made, and built with durable materials that are corrosion resistant. The pump will turn on and off automatically when you open and close your taps, and when it runs, it’s quieter than most. It’s not quiet though, and you will still get some noise when using it.
The water pump pushes the water out at 1,5 gallons per minute which is a bit lower than others that can manage 3,5 gallons per minute. It has a suction lift of 4ft and you should still get good water pressure in your RV’s shower with it, as long as it’s not too big.
1.5 gallons per minute is also enough for most tankless RV water heaters to click on with, so in essence, this pump will be fine, but it’s the personal choice over the pressure that you need to make.
Installing the water pump is easy and it comes with everything you need. It’s also very affordable, and it’s worth owning 2, or just buying one as a spare.
When buying an RV water pump, it has to match the existing system and this comes down to knowing the pump’s suction lift, GPM, and Psi and then matching it to your RV.
A suction lift describes how much distance the pump can pull water over, letting you know the max distance from the tank it can be at. Some have 4ft some have9 ft suction lifts, and you should know the pipe distance between your RV’s water tank and where the pump will sit in order to match them.
Psi stands for pounds per square inch of pressure and if you put a pump into your RV that has too much Psi for the system, you’re going to blow valves and damage the plumbing. Most RVs work at 55 Psi and up to 80, and your pump should off automatically before hitting the maximum the system can hold.
Gallons per minute is about what comes out of your tap. If you have a small RV, 1.2 gallons per minute is ok, if you have a large one with a luxury shower, then you might want to go up to 3.5 GPM. You should also consider your tankless Rv water heater, as it’ll click on at a minimum GPM, so for it to work, your water pump will need to match it.
RV water pumps can make a lot of noise but some are quieter than others, but they are also more expensive. The water pump will only make noise when you’re running a tap or having a shower, so it won’t be on all the time. If you want a pump that makes as little noise as possible, look for a 5 chamber design, as this reduces the vibrations when compared to a 3 chamber.
You can also add a different mounting to the RV water pump that’ll absorb the vibrations and recuse the sound too. Most pumps won’t come with one as standard but you can go buy one separately if you want to ensure you can have a shower in peace.
Before buying an RV water pump, check out where the pump will go and see how much space it is available. The last thing you want is to order a pump and no fit when it comes to installing it. You should also check out if the pump comes with the parts you need for your installation.
Most pumps do include everything you need for a generic installation, but you may have to buy adapters depending on your RV’s plumbing connections.
The best RV water pump, if you’re on a budget, is the Seaflo RV Water Pump. This pump is durable, long-lasting, affordable and you can have it installed in minutes. The pump will automatically come on and off when you use your taps, it’s self-priming, and it pumps out 1.2 gallons per minute which are ideal for most RVs.
The best Rv water pump in the review is the Flojet Quad II RV Water Pump. This self-priming pump is quiet, durable, reliable and it’ll push 3.5 gallons per minute which is enough for any RV and it’ll even ensure your luxury shower has enough pressure too. The pump comes on and off automatically, and once installed, it should run for years without any issues.
The all-around best RV water pump is the Flojet Triplex RV Water Pump. It’s affordable, durable, easy to install, and it gives enough pressure of 2.9 gallons per minute to work with any size RV. It’s also self-priming for ease of use and it does everything automatically for you too.